Department of Electrical and Computer Engineering
The primary emphasis of graduate education in Electrical and Computer Engineering is to allow the student to master a particular area of interest and acquire maturity in the general area of electrical and computer engineering. To aid in planning the student’s course of study, certain broad outlines are presented here. In addition to the requirements stated in the University Graduate Manual, the student must satisfy all applicable items given in this manual.
Two options are available, a thesis option and a non-thesis option. The requirements which must be satisfied
1. At least 30 semester hours of graduate approved credit^^ in a coherent program acceptable to the advisor and approved by the Graduate Committee. This program must include at least 12 semester hours from the approved list of ECE graduate courses.** A total of not more than eight semester hours of the required 30 semester hours may be earned in ECE:5999 M.S. Thesis Research or other independent study (ECE:5998). At least six semester hours of credit must be earned in ECE:5999 M.S. Research.
2. Successful completion of a final examination which is conducted by a committee of at least three faculty members, of which the advisor is chair. One part of the final examination must consist of an oral defense of the thesis. A comprehensive examination of the student’s program is also recommended.
3. At the time of graduation, the cumulative grade point average for all graduate courses counting toward the degree must be 3.00 or higher.
1. At least 30 semester hours of graduate approved credit^^ in a coherent program approved by the Graduate Committee. This program must include at least 18 semester hours from the approved list of ECE graduate courses.** A total of not more than three semester hours of independent study credit (ECE:5998) may be included in the required 30 semester hours total.
2. At the time of graduation, the cumulative grade point average for all graduate courses counting toward the degree must be 3.00 or higher.
For students electing the thesis option, the advisor, or at least one of the co-advisors, must be a member of the Electrical and Computer Engineering faculty. The chairman of the Graduate Committee is advisor to all students selecting the non-thesis option.
The program of study for the Ph.D. degree in Electrical and Computer Engineering requires successful completion of minimum course requirements, a graduate qualifying examination, a comprehensive examination, an original research contribution and defense of a written dissertation.
1. At least 72 semester hours of graduate approved credit^^ in a coherent program acceptable to the advisor and approved by the Graduate Committee. At least 45 semester hours must be earned in formal courses (not thesis or other independent study) including 30 semester hours from the approved list of ECE graduate courses.** The program must also include a minimum of 18 s.h. of Ph.D. research (ECE:7999).
2. Successful completion of the Ph.D. Qualifying Process. The Ph.D. Qualifying Process consists of two parts, the Ph.D. Qualifying Examination and the Breadth Course Requirement. In order to be admitted to the Ph.D. Qualifying Examination the candidate must have a cumulative grade point average of at least 3.25 in all graduate coursework and also in graduate coursework in Electrical and Computer Engineering. A student may take the Qualifying Examination not more than twice. A student must take the Ph.D. Qualifying Examination during their first full academic year in the Ph.D. program, unless a deferral is obtained from the Graduate Committee. A student who fails the Ph.D. Qualifying Examination once, is required to retake the examination on the next occasion that it is offered. The candidate must also complete two breadth courses with a grade of A- or higher as described in the ECE Ph.D. Qualifying Process section below. These courses must be completed within the first four semesters of graduate study (not counting summer sessions).
3. Successful completion of the Ph.D. Comprehensive Examination.
The Ph.D. Comprehensive Examination will consist of two parts: a written research proposal, and an oral examination. The written research proposal must include a thorough literature survey that provides the motivation and background for the proposal.
The Comprehensive Examination may not be taken before passing the Ph.D. Qualifying Examination. It must be completed no later than three calendar years after passing the Qualifying Examination. Failure to meet this deadline will require retaking of the Qualifying Examination. The Qualifying Examination and the Comprehensive Examination may not be taken in the same semester.
4. Successful completion of a final oral defense of the thesis. At least six months must elapse between the completion of the Comprehensive Examination and the final thesis defense.
5. At the time of graduation, the cumulative grade point averages for all graduate courses and the graduate courses counting toward the degree must be 3.25 or higher.
Committees must consist of no fewer than five members, of which four must be tenure-track faculty. At least two faculty members must be from the major department. One member of the committee must be a member of the Graduate Faculty who does not hold a primary appointment in the major department.
The process of qualifying for the Ph.D. program in Electrical and Computer Engineering consists of two parts:
The Electrical and Computer Engineering Department offers the Ph.D. qualifying examination each spring during the month of April or May. Students taking the exam must select, in advance, two subjects from the following list:
Ph.D. Qualifying Examination
Areas and Subjects
Control Theory ECE:3600 Control Systems
Communications ECE:5500 Communication Theory ECE:3500 Communication Systems
Signal Processing ECE:5460 Digital Signal Processing ECE:3400 Linear Systems II
Subject Primary Course Secondary Course
Digital Systems ECE:5300 Switching Theory ECE:3320 Intro. to Digital
Software Systems ECE:5820 SE Languages & Tools ECE:3330 Intro. to Software Design
Computer Architecture ECE:5320 High Perf. Computer Arch. ECE:3350 Comp. Arch. and Org.
Subject Primary Course Secondary Course
Theory ECE:5700 Advanced EM Theory ECE:3700 EM Theory
Solid State Devices ECE:4728 Solid State Physics ECE:3720 EE Materials & Devices
Electronics ECE:5410 Adv. Circuit Techniques. ECE:3410 Electronic Circuits
The subjects selected for the exam may be in the same or different areas. The student will be given two questions on each subject. These questions will be based on material covered by the primary and secondary courses associated with the subject. The questions for each area will be at a level of difficulty consistent with the contents of the respective courses. Registration for this exam begins in March. To register for this exam you need to complete a registration form and return to the Graduate Secretary in room 4016 SC.
Breadth Course Requirement
In order to complete the breadth coursework requirement, the student must complete two additional primary courses from the Ph.D. qualifying examination list of subjects. No more than two of the four subjects chosen for the combined Ph.D. qualifying examination and breadth requirement can be from the same area. Students must receive a grade of at least A- in the breadth courses. Further, the breadth courses must be completed within the first four semesters of graduate study. Students not completing the breadth courses as specified above will automatically fail the Ph.D. Qualifying Process.
Requests to satisfy the breadth coursework requirement with transfer credit will be considered on a case-by-case basis by the Graduate Committee. All such requests must include detailed supporting information regarding the content of the transfer course(s) and be filed with graduate secretary prior to completion of the first semester of graduate study.
Normally, all oral examinations (M.S. thesis defense, Ph.D. comprehensive, Ph.D. thesis defense) should be scheduled during regular University academic sessions. If a thesis defense or comprehensive exam must be scheduled during an interval between academic sessions, explicit prior approval must be obtained from all members of the examining committee well in advance of the examination date.
In order to guide graduate students toward coherent course selection, but still permit individualized tailoring of plans of study for the diversity of research interests of the discipline of Electrical and Computer Engineering, a formal filing of a plan of study is required with the following properties:
1. After being admitted to the graduate degree program, each student must select an advisor and formulate a Plan of Study before being permitted to register for his/her second semester. An advisory committee need not be formed at this time.
2. The Plan of Study will clearly specify the course requirements to be satisfied before graduation, and must be consistent with other provisions of the Graduate Manual. This plan must be approved by the advisor and be placed in the student’s file with the graduate secretary. The plan of study will normally designate the specific courses to be taken, but may also include specifiers such as: “Student must complete n of the following m courses” where a list of m courses is then specified.
3. Changes to the Plan of Study will be allowed with the approval of the advisor. The change must be approved prior to the student taking a course not on the current plan of study.
4. Changing of advisors requires consultation among the previous advisor, the proposed new advisor, and the student. The Graduate Committee must be immediately notified in the event of such a change.
5. All students currently enrolled in the Electrical and Computer Engineering graduate program, but not yet having satisfied the formal course requirements for their currently approved degree objective, must file a plan of study according to the above-stated policies.
Students at all levels are encouraged to strengthen their plans of study with appropriate courses in other areas such as mathematics, computer science, statistics and physics. The advisor’s assistance and approval should be sought in choosing these courses.
All Electrical and Computer Engineering Graduate students enrolled on a full time basis and/or holding assistantships must enroll each semester in the course ECE:5000 (Graduate Seminar: Electrical and Computer Engineering) for 0 semester hours of credit. Students who miss more than a third of the regularly scheduled Electrical and Computer Engineering Graduate Colloquia will receive a grade of W for this course. Exemptions to this requirement will be granted only under exceptional circumstances by the Chairperson of the Electrical and Computer Engineering Graduate Committee.
The entrance standards for the Electrical and Computer Engineering Graduate Program are:
1. For the M.S. program a minimum GPA of 3.0 on a four-point basis is required on all courses in electrical and computer engineering, mathematics and physics. For the Ph.D. program, in addition to the minimum GPA of 3.0 for the MS program, if applicable, a minimum graduate GPA of 3.25 is also required.
2. An M.S. student with a GPA less than 3.0, but better than 2.5 on courses in electrical and computer engineering, mathematics and physics may be admitted on a probationary status.
3. Students with baccalaureate degrees and strong credentials in related areas (e.g., physics, mathematics and computer sciences) may be admitted. In such cases, additional course work without graduate credit may be required.
4. All new foreign students scoring less than 550 on the Test of English as a Foreign Language are required to take an examination administered by the Linguistics Department upon arrival. Any remedial courses recommended by the Linguistics Department upon the result of this examination must be completed at the earliest opportunity.
A student shall be placed on probation if the student’s cumulative grade point average on graduate work done at The University of Iowa falls below 3.00 for the M.S. students and 3.25 for the Ph.D. students. After one year or the completion of 8 more semester hours of graduate work at this University, whichever comes first, the grade point average will be re-examined. If it remains below the minimum requirement, the student shall be denied permission to re-register; otherwise the student shall be restored to good standing.
All students in advanced degree programs are required to complete professional research and/or teaching assignments, regardless of whether they receive financial aid, before being awarded an advanced degree.
Only S (satisfactory) and U (unsatisfactory) grades shall be given in courses numbered ECE:5000, ECE:5998 and ECE:5999. Credit earned through extension and Guided Self-Study Program courses may not be applied toward satisfying course requirements unless the student was an off-campus student at the time the courses were taken.
In the absence of special arrangements to the contrary, every student is expected to be registered as a full- time student during each term in which the student receives an assistantship.
Exceptions to the regulations in this manual are allowed only on the basis of a written petition by the student and the approval of the Graduate Committee.
**Approved ECE Graduate Courses
All formal ECE courses numbered ECE:5001 and higher are automatically on the list of the approved ECE graduate courses. In addition, the following courses are also considered approved for ECE graduate courses:
ECE:4480 Knowledge Discovery (cross listing of CS:4480)
ECE:4728 Introductory Solid State Physics (cross listing of PHYS:4728)
Contemporary Topics courses (ECE:5995 and ECE:7995) with different content may be counted more than once.
All courses used to meet the ECE semester hour total must be taken for a letter grade (not S/U).
^^ Guidelines for graduate approved course credit
In addition to the approved ECE graduate courses**, courses from other departments may be taken to fulfill graduation requirements. To obtain credit toward your graduate degree, all of the following criteria must be met:
1. The course must be accepted as a graduate level course for majors in the home department from which it is offered.
2. All courses used to meet the semester hour total must be taken for a letter grade (not S/U).
3. The course must contribute to a coherent focused training program acceptable to the advisor and approved by the Graduate Committee. For example, graduate level courses in other Engineering, Computer Science, Math, or Physics departments that support your coherent training program are appropriate for graduate course credit.
In rare circumstances courses not meeting the approved ECE graduate course**, or graduate approved course^^ requirements may be requested on the basis of a written petition by the student and approval of the Graduate Committee.